Spot charge removal without compressed air
UL , CE , CSA Approved
CE : EMC Directive
UL, CSA : Certified by TÜV SÜD America Inc. (NRTL)
Incorporating our unique high-frequency AC method and “Sirocco fan”, we have achieved excelling balanced charge removal performance even at slow fan speeds. Particularly well suited to spot charge removal on semiconductor post-processing and electronic component manufacturing equipment, these super compact units immediately solve your problems with static electricity without requiring compressed air.
■Miniature, ultralight, fast charge removal
A perfect fit for installation in other devices
• Dimensions: W65 × H60 × D33 mm W2.559 × H2.362 × D1.299 in
• Net weight: 110 g approx.
• Charge removal Time (±1,000 V → ±100 V):1.5 sec approx. (typical)
■Adjustable
Includes volume adjuster to change fan blowing to meet your needs
■Safe design
The LED display and output indicate maintenance timing and problems with the fan
Assembled and disassembled in a single touch, reducing steps required to replace parts or clean filters
Mountable like a sensor in cell workbenches or inside devices
| Type | Compact fan type | |
|---|---|---|
| Model No. | ER-Q | |
| Charge removal time (±1,000 V → ±100 V) |
1.5 sec. approx. (Note 2) | |
| Ion balance | ±10 V or less (Note 2) | |
| Power supply voltage | 24 V DC ±10% | |
| Power consumption | 200 mA or less | |
| Discharge method | High-frequency AC method | |
| Discharge output voltage | ±2 kV approx. | |
| Max. fan speed | 6.4 m/s (Note 2) | |
| Max. fan volume | 0.2 m3/min. | |
| Output(CHECK, ALARM) | NPN transistor / open collector • Max sink current: 50 mA • Applied voltage: 30 V DC or less (between output terminal and 0 V) • Residual voltage: 1 V or less (at input current of 50 mA) |
|
| Output operation | Check: On when discharge check (Note 3) detected Off at all other times Error: Off when discharge error or fan error (Note 3) detected On at all other times |
|
| Short-circuit protection | Incorporated | |
| Indicators | Discharge (DSC): Green LED, Alarm (ALARM): Red LED | |
| Ozone generation amount | 0.02 ppm or less (Note 2) | |
| Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage: –10 to +65 ℃ +14 to +149 ℉ | |
| Ambient humidity | 35 to 65% RH (No dew condensation), Storage: 35 to 65% RH | |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each | |
| Grounding method | C (capacitor) grounding | |
| Material | Enclosure: PBT, Discharge needle: Tungsten | |
| Weight | Net weight: 110 g approx. | |
| Accessory | Connector for wiring: 1 set [Manufactured by Molex: Housing (5557-08P), Terminal (5556T)] |
|
Notes:
